DIN (Germany) Metric to Imperial (USA) PVC adapter for the Durso Standpipe. This should only be used with "slip" style Durso Standpipes.
- 32mm x 1 inch: The "Spigot" side is 1 inch and inserts into the bottom of the Durso Standpipe the leaving a 32mm nominal (actual pipe outer diameter is 32mm) slip socket exposed. It can also be used with 25mm JIS (Japan) pipe.
- If not used for a Durso Standpipe - The US side is 1.0 inch spigot meaning it'll glue into a standard 1.0 inch fitting, If you need to connect to 1.0 inch schedule 40/80 pipe you'll need a standard coupling to use this item.
- 50mm x 1.5 inch: The "Spigot" side is 1.5 inch and inserts into the bottom of the Durso Standpipe the leaving a 50mm nominal (actual pipe outer diameter is 50mm) slip socket exposed.
- If not used for a Durso Standpipe - The US side is 1.5 inch spigot meaning it'll glue into a standard 1.5 inch fitting, If you need to connect to 1.5 inch schedule 40/80 pipe you'll need a standard coupling to use this item.
NOTE: This can not be added to a Durso Standpipe afterwards, it needs to be purchased with the Durso Standpipe as this replaced a part normally used.